ZZR1400 front end for E1

If you have a full build Project on the go , Here's the place to show off your latest modification's , also show your classic's here

Moderators: RAFlyer, yorkie, tangosevern, Steve-TC1

Post Reply
User avatar
Delboy
Moto GP Rider
Moto GP Rider
Posts: 520
Joined: Sun Aug 02, 2009 10:38 pm
Location: Orpington, Kent (The Garden of England) C1 fighter broken, E1 broken. C2 frame & V5

ZZR1400 front end for E1

Post by Delboy » Fri Jul 01, 2016 4:39 pm

Hi guys I have started the strip down of my E1 to fit ZZR1400 front end. Had to drill out the screws for the ignition switch which can be a little tricky but all out... I have looked at whether to use the ZX12R bottom yoke and fit 1mm spacers or to fit the 1400's yoke but have the 9's spindle pressed in. One thing I have noticed is that the 9 and 12 spindles are 22mm top thread and 25mm for the be...login to view the rest of this post
RIDE THE BITCH LIKE YOU STOLE HER

This topic has 20 replies

You must be a registered member and logged in to view the replies in this topic.


Register Login
 
Post Reply