More pictures of my home made slipper clutch.

Finding non standard parts from other bikes that fit your ZX-9R

Moderators: RAFlyer, yorkie, tangosevern, Steve-TC1

Yngve
BSB Rider
BSB Rider
Posts: 125
Joined: Wed May 27, 2009 6:31 pm

More pictures of my home made slipper clutch.

Post by Yngve » Wed Jun 04, 2014 6:27 am

Image

Image

Image

Image

Image

Image

I took it apart to check for wear after 8 track days. I did not find any wear at all. :)
"Cams ? What about them?
They open and shut valves don`t they?"

Rob Muzzy in an interview about what cams he used on the Gpz750 since thy were able to win over the 4 valve H###A 750

User avatar
Steve-TC1
Top Cat
Posts: 36554
Joined: Fri May 05, 2006 12:47 am
Location: Manchester
Contact:

Post by Steve-TC1 » Wed Jun 04, 2014 8:53 am

Thanks M8 , appreciated =D> =D> :!:

Yngve
BSB Rider
BSB Rider
Posts: 125
Joined: Wed May 27, 2009 6:31 pm

Post by Yngve » Fri Jun 06, 2014 7:18 pm

Image

Image

Image
"Cams ? What about them?
They open and shut valves don`t they?"

Rob Muzzy in an interview about what cams he used on the Gpz750 since thy were able to win over the 4 valve H###A 750

User avatar
obsidian
WSB Rider
WSB Rider
Posts: 428
Joined: Fri Mar 14, 2014 3:52 am

Post by obsidian » Fri Jun 06, 2014 9:32 pm

you da man! =D>

Yngve
BSB Rider
BSB Rider
Posts: 125
Joined: Wed May 27, 2009 6:31 pm

Post by Yngve » Tue Jun 10, 2014 9:51 pm

I put the clutch on the scale and the ZX10/9 was 150g heavier.
I also have some small vibrations so I am going to balance the clutch housing.
Don't know how others do it so I guess I have to figure it out.

:)
"Cams ? What about them?
They open and shut valves don`t they?"

Rob Muzzy in an interview about what cams he used on the Gpz750 since thy were able to win over the 4 valve H###A 750

User avatar
obsidian
WSB Rider
WSB Rider
Posts: 428
Joined: Fri Mar 14, 2014 3:52 am

Re: More pictures of my home made slipper clutch.

Post by obsidian » Sun Nov 03, 2019 12:42 pm

Hey.
Anybody still got the pictures of the mod perhaps?
Kinda bugs me not having it on the newer bike of mine..
'02 9R / '92 ZXR750

User avatar
yorkie
Ninjaneer
Posts: 11959
Joined: Mon Sep 25, 2006 5:46 pm
Location: Altofts Yorks. Blue 9C2 9F2 & 12B4

Re: More pictures of my home made slipper clutch.

Post by yorkie » Sun Nov 03, 2019 3:14 pm

I've edited the post so any pictures left on the server should now show up if they're not there then the post image server has lost them. Looks like you have 6 out of 9 so not too bad.
Just got yourself a ZX-9R, then do yourself and your bike a favour, read this thread the sticky post in General Technical viewtopic.php?f=21&t=28097

Please will forum members put their bike model letter, & 1 or 2 after their Profile Location. eg: Your Town & B1,2,3,4 C1,2 E1,2 F1,2
As all zx9's are all slightly different, and I get fed up having to ask which model & number, as a year may not be accurate.
Image

User avatar
obsidian
WSB Rider
WSB Rider
Posts: 428
Joined: Fri Mar 14, 2014 3:52 am

Re: More pictures of my home made slipper clutch.

Post by obsidian » Sun Nov 03, 2019 3:55 pm

Noice!
'02 9R / '92 ZXR750

firebeast
Ninja Guru
Ninja Guru
Posts: 1856
Joined: Fri Jun 18, 2010 11:34 pm
Location: plymouth, blue c2 ,blue f1 .

Re: More pictures of my home made slipper clutch.

Post by firebeast » Sun Nov 03, 2019 11:08 pm

Still wish I had just bought that when he was selling it, ](*,)
its the fight in the dog not the dog in the fight!

User avatar
obsidian
WSB Rider
WSB Rider
Posts: 428
Joined: Fri Mar 14, 2014 3:52 am

Re: More pictures of my home made slipper clutch.

Post by obsidian » Mon Nov 04, 2019 2:56 am

Ha!
Yeah, I now also found his post selling it back in 2016.
At 150$ it was a good/fair price, too.
Sent him a PN just in case he reads it and might restore some pictures / fill in some blanks.

But from what I gathered so far (and what I remembered), it is quite doable ..
As for changing the rivets, I know for that some '89-90s ZXRs had those come loose,
with the generally accepted (among average homegamers that is) solution being to use
(modified) M7 screws and ultra thin nuts which would then be threadlocked or spot welded (not sure anymore).

That aside, all the stuff about Z1000 gearbox being a straight replacement for the 9R engines,
does anymody know if the clutch basket would also be a straight fit?

- Reason I'm asking is I've found some info that the 2016 Z1000SX models (and up)
now have the slipper clutch, and the whole basket is straight fit to the regular Z1000.

So, if, by some magic, z1000 basket should fit the 9r engines without a drama, we could have a winner right there.
'02 9R / '92 ZXR750

firebeast
Ninja Guru
Ninja Guru
Posts: 1856
Joined: Fri Jun 18, 2010 11:34 pm
Location: plymouth, blue c2 ,blue f1 .

Re: More pictures of my home made slipper clutch.

Post by firebeast » Mon Nov 04, 2019 7:31 pm

I can’t recall tbh. I reckon if you did a bit of trawling z1000 forums you may get an answer, as I know they used to fit 9r cams and the lighter 9 flywheel from memory. So chances are someone may have looked at the clutch if it was a bit beefier on the 9.
its the fight in the dog not the dog in the fight!

User avatar
tangosevern
Ninja Guru
Ninja Guru
Posts: 1333
Joined: Mon Jul 13, 2015 2:53 am
Location: City of Bristol UK zx9r B2

Re: More pictures of my home made slipper clutch.

Post by tangosevern » Tue Nov 05, 2019 10:00 am

Don't recall which zx10r Gen,but sorting the rivets is a common mod for the track jockeys as the 10r clutch's are renowned for exploding under track conditions
You take the blue pill—the story ends, you wake up in your bed and believe whatever you want to believe. You take the red pill—you stay in Wonderland, and I show you how deep the rabbit hole goes. Remember: all I'm offering is the truth.

User avatar
BkHooligan
WSB Rider
WSB Rider
Posts: 160
Joined: Thu Oct 24, 2019 9:51 pm
Location: Brooklyn NYC(the rotten apple), 98-C1

Re: More pictures of my home made slipper clutch.

Post by BkHooligan » Tue Dec 10, 2019 4:03 pm

Hello there fellas I really think that this thread should be revived .its a super great mod and probably the most expensive mod you probably can do besides race suspension. A new slipper clutch is over 900$ USD. Cough bullshit lol.

I drilled out the rivets on my cb900 clutch to replace the rubber dampers. The bolts came with the kit also. This should be the "hardest" most intimidating part of the project. AND IT SHOULDNT BE AT ALL. Below I posted the instructions for drilling out my cb900 clutch basket. Should give a overall picture to those who think this is way to hard. I also have been digging around he said he used a 07-08 zx10r clutch basket. The 07-08 zx6r clutch basket look identical to me besides the 4 digit number on 1 of the rivets. Not sure if its production dates or what. But I believe this mod can easily be done . He did this to a C1 I have a E engine I would have to see If the 07 08 works for the E.

I also noticed the 01 02 zx6r clutch is compatible with the 05-08 zx6r AND the 05 zx6r and up seem to carry the slipper clutch. What do you guys think ?
Attachments
Screenshot_20191210-092207_eBay.jpg
Screenshot_20191210-092837_eBay.jpg
Screenshot_20191210-102313_inCollage.jpg
Side by side 07-08 zx6r - 07-08 zx10r
Screenshot_20191210-101513_Drive.jpg
Screenshot_20191210-101509_Drive.jpg
98 zx9r C1, with a E engine swap, muzzy carbonfiber short can,

Previous bikes ,03 vstar 1100,80 cb900c custom built

User avatar
tangosevern
Ninja Guru
Ninja Guru
Posts: 1333
Joined: Mon Jul 13, 2015 2:53 am
Location: City of Bristol UK zx9r B2

Re: More pictures of my home made slipper clutch.

Post by tangosevern » Tue Dec 10, 2019 6:27 pm

I shall ask around for Yngve...I think he gave me some info earlier this year regarding s/s valves if it was him he's still building zx7 engines for track use ???
You take the blue pill—the story ends, you wake up in your bed and believe whatever you want to believe. You take the red pill—you stay in Wonderland, and I show you how deep the rabbit hole goes. Remember: all I'm offering is the truth.

rod750
Privateer
Privateer
Posts: 36
Joined: Sat Nov 09, 2019 7:06 am
Location: Melbourne C2 The Ginger Ninja

Re: More pictures of my home made slipper clutch.

Post by rod750 » Thu Dec 26, 2019 9:30 am

Is this something to do with what's in this link?

https://andys-kawasaki-zxr-zx7r-tribute ... er-clutch/
***
Rod
***

Post Reply